New Eltek Touchscreen Controller & Monitors

April 1, 2025 Adam 0

Both the Eltek Flatpack2 Touchscreen Controller and Eltek Monitor projects have been updated.

The PCB has been redesigned so the controller board can now piggyback mount to the screen.

This makes mounting much easier, with only one set of screws … Read more...

Eltek Controller Compatibility

February 20, 2025 Adam 0

The following Eltek Flatpack 2 Rectifiers are known to work with all of my Eltek controllers.

Thank you to those who spent a few minutes to take a photo and send it in.

 

Flatpack2 48/2000 HE   24115.105 Read more...

Eltek Flatpack 2 Monitor Available

February 19, 2024 Adam 0

Two versions of the Eltek Flatpack 2 Monitor are now available, one with a colour TFT screen, and the other with a mono OLED screen.

The colour screen has one fixed font.

A close up pictures shows the large text … Read more...

Eltek FP2 Monitor Development

December 3, 2023 Adam 0

Update: 19-Dec-2023

Eltek FP2 Monitor is currently being developed as a replacement for the popular Volts Setter.

Eltek Monitor is used to set the default start-up voltage of an Eltek FLATPACK2  24 V or 48 V Rectifier, and the following … Read more...

New – Eltek Flatpack2 Volts Setter

January 18, 2022 Adam 0

This low-cost device allows you to set the default start-up voltage of an Eltek Flatpack2 Rectifier.

Compatible with 24V and 48V rectifiers.

Connect your own PC or laptop to Volts Setter, and connect Volts Setter to your own FP2 interface … Read more...

Eltek FP2 Controllers in stock

May 28, 2021 Adam 0

A new batch of Eltek Flatpack2 controllers are in stock.

This controller will work with 24 V and 48 V Flatpack2 rectifiers.

New to this batch, and of interest to USA customers, is the ability to select Fahrenheit for the … Read more...

Eltek Flatpack2 HE 48V/2000W Controller

September 26, 2019 Adam 0

An Eltek Flatpack2 HE 48V/2000W rectifier is being used as the power supply for a 23cm 600W LDMOS Power Amplifier project.

This touchscreen controller has been developed to control the Flatpack2 HE 48V/2000W, and display its data.

[jwplayer mediaid=”6445″ image=”https://vk4ghz.com/wordpress/wp-content/uploads/poster-1.jpg” … Read more...

Eltek Flatpack2 controller PSU

May 27, 2019 Adam 0

A reliable 5V power supply is required to power a  controller for an Eltek Flatpack2 48/2000 HE rectifier being used as the PSU for a future 23cm 600W LDMOS Power Amplifier project.