Hi all
I have just completed an article describing how to provide an external 'PLL Lock" to a Kuhne MKU 57 G3 432 and MKU 10 G3 432 transverter module.
It's very easy to have a "PLL Lock" status LED on the front panel of your transverter system, for quick and easy visual reassurance.
All the details, including clear, bright, in-focus pictures (!!!) of where to tap off these points, found at: http://vk4ghz.com/kuhne-g3-ext-lock-led/
Kuhne G3 External Lock LED
Kuhne G3 External Lock LED
Adam, Brisbane
vk4ghz.com
VK4GHZ on Youtube
VK4GHZ on Odysee
10 things that happen when you stop checking Facebook constantly: http://tiny.cc/t5h7cz
How to quit Facebook: https://www.consumerreports.org/social- ... -facebook/
vk4ghz.com
VK4GHZ on Youtube
VK4GHZ on Odysee
10 things that happen when you stop checking Facebook constantly: http://tiny.cc/t5h7cz
How to quit Facebook: https://www.consumerreports.org/social- ... -facebook/
Re: Kuhne G3 External Lock LED
Adam
I used an LDR from a "Baby night Lite" Placed over the internal LED in the same position as your feed thru, out to the front panel via 12v - works a treat.
John
VK4JMC
I used an LDR from a "Baby night Lite" Placed over the internal LED in the same position as your feed thru, out to the front panel via 12v - works a treat.
John
VK4JMC