Page 1 of 1
ATC Capacitors
Posted: Fri Feb 18, 2011 1:41 pm
by VK2XAX
Hi all,
I've looked in all the usual places for ATC capacitors, and asked minikits but to no avail....
So... I'm building this amp for 1296 .....
http://www.ve1alq.com/MRF286-RO4003C%20 ... index.html
and I need these...
1.8pF ATC700A qty 2
22pf ATC700B qty 2
Any help appreciated.
regards
Tim
Re: ATC Capacitors
Posted: Fri Feb 18, 2011 1:57 pm
by ZL2WHO
Hi. I have lots of ATC's. can help with the 22p but 1.8 may be a struggle. Ron VK4DD has a few, might be worth an ask. mark.
Re: ATC Capacitors
Posted: Fri Feb 18, 2011 4:04 pm
by VK4CDI
Hi Tim
Can't help with the caps, but did you buy a PCB from VE1?
Where did you source your MRF286's?
Cheers
Phil VK4CDI
Re: ATC Capacitors
Posted: Fri Feb 18, 2011 4:09 pm
by VK2XAX
VK4CDI wrote:Hi Tim
Can't help with the caps, but did you buy a PCB from VE1?
Where did you source your MRF286's?
I
Yes, I bought the PCB from VE1ALQ
I bought the transistors, $46US for two including postage from UTsource here...
http://www.utsource.net/
Its all in the mail and should be here in 5 - 10days.
cheers
Tim
Re: ATC Capacitors
Posted: Fri Feb 18, 2011 4:19 pm
by VK3PF
Tim,
Check out:
http://www.rfmicrowave.it/catalogue.php?lang=eng
Prices are reasonable and they have supplied things to me in the past without a hitch.
Peter VK3PF
Re: ATC Capacitors
Posted: Mon Feb 21, 2011 1:13 pm
by VK4CDI
Tim
Go onto Darrell's site and get some samples from ATC.......
I have 2 reels of 10 each 1.8 and 22 on the way...free!
Where did you get your 150W termination?
Phil VK4CDI
Re: ATC Capacitors
Posted: Mon Feb 21, 2011 2:57 pm
by VK2XAX
LOL.. Solved my ATC problem, ATC will ship you 10 of each for free
as for the 150w load, I picked up a couple of those for about $10each off the bay.
cheers
Tim