Greetings all,I have a problem with a FT-1000.Nil Transmit on all bands.Rx is ok,when the ptt is activated no RF power is generated,all the voltages appear ok on the RF board,the auto tuner goes thru the motions of wanting to work but after a couple of seconds goes back to the idle state.Has anybody struck anything like this before?
I did have a problem with the power supply which caused the transmitter to do some funny things but tracked that down to a burnt Molex plug.
Thanks Bill.
VK4VHD
FT1000 Nil Transmit
Transceiver mods, fixes, issues, reviews
Return to “Transceivers, Transmitters & Receivers”
Jump to
- System Notices
- ↳ System Notices
- Band by band
- ↳ LF, MF, HF
- ↳ 50 MHz
- ↳ 144 & 432 MHz
- ↳ 1296, Microwaves and Opto
- ↳ Propagation & Solar Cycle News
- General
- ↳ General Discussion
- ↳ AIS, Beacons, FM & TV DX
- ↳ AIS Marine Tracking
- ↳ Beacons
- ↳ FM & TV DX
- ↳ Ancillary, Test Equipment, Components & Parts
- ↳ Computer thingies
- ↳ Android related
- ↳ Arduino, Picaxe, Raspberry Pi, and variants
- ↳ PC/Mac Hardware
- ↳ PC/Mac iOS Software
- ↳ Software Defined Radio
- ↳ Miscellaneous
- ↳ Contests, Field Days, Portable Operation, JOTA, SOTA
- ↳ EMC, Interference
- ↳ Regulatory, Licencing & Exams
- ↳ Silent Keys
- ↳ VK3ZL Amplifiers
- ↳ Towers, Masts & Transmission Lines
- ↳ Transceivers, Transmitters & Receivers
- Specialised Interests
- ↳ Digital Modes
- ↳ FT8
- ↳ WSJT
- ↳ WSPR
- ↳ Digital Modes Miscellaneous
- ↳ E.M.E.
- ↳ FM, Repeaters, D-STAR
- ↳ Satellites & Balloons