Help with WSJT-X, Digi Keyer II, and Ubuntu?
Posted: Sun Sep 27, 2020 12:24 pm
I'm trying to get an IC-7000 working with WSJT-X (v2.2.2) on Ubuntu 18.04 with a Digi Keyer II (current firmware). I have WSJT-X communicating with the radio (it can read the radio's frequency and key it up). However, it looks like the audio isn't going back and forth between the radio and the computer.
If I disconnect the antenna I see no difference in the waterfall display than with it connected. Also, I get no power out when trying to transmit (with the antenna attached HI HI).
I have selected the following for Soundcard Input and Output:
Input: alsa_input.usb-microHAM_microHAM_CODEC-00.analog-stereo
Output: alsa_output.usb-microHAM_microHAM_CODEC-00.analog-stereo
Any help would be appreciated.
If I disconnect the antenna I see no difference in the waterfall display than with it connected. Also, I get no power out when trying to transmit (with the antenna attached HI HI).
I have selected the following for Soundcard Input and Output:
Input: alsa_input.usb-microHAM_microHAM_CODEC-00.analog-stereo
Output: alsa_output.usb-microHAM_microHAM_CODEC-00.analog-stereo
Any help would be appreciated.