Airspy + Spyverter SDR receiver
Posted: Fri Jan 01, 2016 11:31 am
Haven't seen this before. FYI.
• NF better than 8dB
• IIP3 > +30dBm
• Minimum RF Input: 1 kHz
• Maximum RF Input: 60 MHz
• IF frequency: 120 – 180 MHz
• Phase noise at 10kHz: -122 dBc/Hz
Available from iTeadStudio (who also provide excellent quality PCBs to order) https://www.itead.cc/spyverter.html
This has taken all of a few minutes to cut & paste text & links, and embed the YouTube video here.
The new high performance SpyVerter, extends the reception range down to DC for a gapless DC – 1.8GHz coverage with a superb 10MHz instantaneous view.
• NF better than 8dB
• IIP3 > +30dBm
• Minimum RF Input: 1 kHz
• Maximum RF Input: 60 MHz
• IF frequency: 120 – 180 MHz
• Phase noise at 10kHz: -122 dBc/Hz
Available from iTeadStudio (who also provide excellent quality PCBs to order) https://www.itead.cc/spyverter.html
Review (14-Dec-2015) http://www.rtl-sdr.com/tag/spyverter/Published on Sep 16, 2015
This video shows the newest features of SDR# that provide seamless tuning form VLF through HF and VHF/UHF with AIrspy and Spyverter. The software automatically reconfigures as the receiver is tuned below 35 Mhz, including setting the correct offset. A new PPM calibration feature is also provided for the Spyverter. A manual antenna switch is used.
Youssef Touil is the creator of SDR# software, and the Airspy SDR, W9RAN collaborated in the development of Spyverter.
This has taken all of a few minutes to cut & paste text & links, and embed the YouTube video here.
