Ideal for when a normal cable tie may be too rigid for small delicate things, and/or you need a small amount of tension, ie; holding down a tiny 5.8 GHz VTX board, or a motor ESC on your quadcopter!
It does have uses but being of a softer material also limitations that need to be taken into account
Re: Video: Rapstrap (bye bye cable ties!)
Posted: Wed Nov 05, 2014 3:19 pm
by VK4GHZ
VK4TI wrote:It does have uses but being of a softer material also limitations that need to be taken into account
Yes, it depends on the application.
Here we see a Mobius camera mounted on top of a mini quad.
Noting the moongel in between, this offers a firm clamp, whilst offering some "give".
If you look closely here (black rapstrap over black ESC), you'll note the rapstraps holding down the speed controllers on the arms:
If over-tightened, a conventional cable tie would risk crushing the SMD components under the ESC heatshrink cover.
If under-tightened, a conventional cable would be useless (and therefore pointless).
Conventional cable management applications aside, having some elasticity in a cable tie can be useful.
Re: Video: Rapstrap (bye bye cable ties!)
Posted: Fri Nov 07, 2014 3:21 pm
by VK4GHZ
And from 4Cabling, on my door 48 hours later!
(For any tight arses out there, eBay might be a few dollars cheaper, but from experience, you'll be waiting longer!)
Now for some bondage!
Re: Video: Rapstrap (bye bye cable ties!)
Posted: Fri Nov 07, 2014 3:40 pm
by VK3BQ
It's 2014. And you do video and all. But. Please no vision Adam. )
Re: Video: Rapstrap (bye bye cable ties!)
Posted: Fri Nov 07, 2014 7:46 pm
by VK4TI
VK3BQ wrote:It's 2014. And you do video and all. But. Please no vision Adam. )
when the market release occurred 2 decades ago the video then was very average even then