Hi All
I would like to converse with anyone who has successfully interfaced a Standard Kenwood TS-2000 (one without a detachable front panel) with the Microbit REMOTERIG RRC-1258 Mk11 interface?
My intention is to establish remote access for others to my 6m station for Chirp-Radar/propagation use.
The on-line manual for the interfaces is "not great" in many areas and leaves a number of "guessing holes" that I need to cover.
I have only bought ONE of the RRC-1258 interfaces as I understood that any internet-connected computer can control my station via Ham Radio Deluxe software.
I would appreciate advice on a number of practical issues
Regards
Kevin (KJ) VK4UH Brisbane
drkevinjohnston@bigpond.com
RemoteRig with Kenwood TS2000
RemoteRig with Kenwood TS2000
Kevin (KJ) VK4UH
Brisbane
Brisbane
Re: RemoteRig with Kenwood TS2000
.....
Last edited by VK2OMD on Fri Mar 21, 2014 8:25 pm, edited 1 time in total.
Re: RemoteRig with Kenwood TS2000
Sorry KJ I can't help you but will be watching this thread with interest!
I hope there will be some who can really help!
I hope there will be some who can really help!
73
Andy VK6OX
If you can't explain it simply, you don't understand it well enough. Albert Einstein
Andy VK6OX
If you can't explain it simply, you don't understand it well enough. Albert Einstein
Re: RemoteRig with Kenwood TS2000
I use RemoteRig quite successfully with several Icom IC-706MkIIG's. However, this uses 2 RRC-1258 interfaces to connect head to body via the interwebs.
The way I read what you're doing, you'll need to add a RRC-Micro PC-Client to the equation. This will enable HRD to control the TS-2000 as below:
73,
The way I read what you're doing, you'll need to add a RRC-Micro PC-Client to the equation. This will enable HRD to control the TS-2000 as below:
73,
Rick Kowalewski
-- Perth, WA, 6530 -- OF77xw --
VK6RK
-- Perth, WA, 6530 -- OF77xw --
VK6RK
Re: RemoteRig with Kenwood TS2000
Thanks Rick
Has anyone had HRD interfacing with any remote station WITHOUT this electronic interface? ie driving the remote station from the computer screen only without an actual radio head in place.
Kevin VK4UH Brisbane
Has anyone had HRD interfacing with any remote station WITHOUT this electronic interface? ie driving the remote station from the computer screen only without an actual radio head in place.
Kevin VK4UH Brisbane
Kevin (KJ) VK4UH
Brisbane
Brisbane