2m 70cm 23cm LDMOS Amplifiers Stacked

[9Q1EK]

Hi All,
For the homebrewer’s… and future EME projects.
I’ll stop the homebrew for more of one month because QSY from 9Q to VE2 for holidays (and find parts for some others projects).
73’s Georges ZS1II
http://ve2ek-9q1ek.blogspot.com/

[VK2ZRH]

Great stack !

73, Roger Harrison VK2ZRH

[VK4GHZ]

Wow!
I really like the enclosures, metering and layout Georges.
Very professional looking.

Can you explain the blue front panel and how the lettering and artwork is done please?

[9Q1EK]

Hi Friends,
To do it, I’m not an expert, Hi, but it is my solution and I use this for the design of all my homemade equipments.(see my blog with).

Go to Front panel designer website
http://www.frontpanelexpress.com/

Download it
Follow instruction and Make your design (blue, or..? as you like).
When it is finished, print your job to see if you are satisfied or not. Hi

I print the front face on the Clear Full-Sheet Labels for LaserJet Printers
AVERY 21,6cm X 27,9cm for laser printer with ONE adhesive face.

When it’s done, I put the sheet in the Laminating Pouches (FELLOWES 100 or 175 Microns)
I use small Laminating machine as FELLOWES lunar A4.

Carefully by cutting just near the drawing, remove only ONE FACE OF the laminating. The face is the opposite where you have the drawing and the face where you have the adhesive.
Then now you are ready to apply it on your favourite front face.
Result; it is fixed and your face is laminated.
I hope this will help and give the taste to build.
Enjoy my Friends.
73’s Georges ZS1II
http://ve2ek-9q1ek.blogspot.com/

[9Q1EK]

GM Roger,
Did you try this? for front panel..
73’s Georges ZS1II
http://ve2ek-9q1ek.blogspot.com/