N Connectors for LMR400uf

Related discussion about towers, masts, and transmissions lines
Post Reply
VK4WTN
Frequent Poster
Posts: 154
Joined: Thu Jan 14, 2010 4:45 pm

N Connectors for LMR400uf

Post by VK4WTN »

Hi all, just wondering if anyone knows a cheaper N type (clamp) coax connector to fit LMR400uf.
Rojone have the TC-400-NMC which is fairly expensive. The problem with normal N connectors is the hole in the pin is too small for the larger LMR400uf centre wire.
regards Wayne VK4WTN
User avatar
VK4ADC
Forum Diehard
Posts: 464
Joined: Sun Dec 30, 2007 7:47 am
Location: New Beith, Qld 4124

Re: N Connectors for LMR400uf

Post by VK4ADC »

Try the RF Shop in Brissy : http://www.rfshop.com.au
Doug VK4ADC, QG62lg51
http://www.vk4adc.com
User avatar
VK5TX
Forum Diehard
Posts: 219
Joined: Mon Sep 20, 2010 4:31 pm

Re: N Connectors for LMR400uf

Post by VK5TX »

Rfsupplier.com
VK4TI
Forum Diehard
Posts: 708
Joined: Wed Dec 19, 2012 6:25 am

Re: N Connectors for LMR400uf

Post by VK4TI »

VK4WTN wrote:Hi all, just wondering if anyone knows a cheaper N type (clamp) coax connector to fit LMR400uf.
Rojone have the TC-400-NMC which is fairly expensive. The problem with normal N connectors is the hole in the pin is too small for the larger LMR400uf centre wire.
regards Wayne VK4WTN
madisons
VK4WTN
Frequent Poster
Posts: 154
Joined: Thu Jan 14, 2010 4:45 pm

Re: N Connectors for LMR400uf

Post by VK4WTN »

Thanks for the replies guys will check those companies out
regards Wayne VK4WTN
Post Reply