Page 1 of 1

Radio Australia digital test transmission

Posted: Sun May 19, 2013 8:39 am
by VK3TYG
Hi guys.
I have been informed that Radio Australia, tonight 19th May, will broadcast a series of digital test transmissions at two different times.
They will be using the MFSK16 & MFSK32 modes. MFSK16 will be first, followed by MFSK32.
Schedules are:-

0830-0835 UTC (1830-1835 EST) - 7410 & 11945
1230-1235 UTC (2230-2235 EST) - 9580 & 12095

Have a go at decoding these transmissions, reception reports are welcome.
Not sure if this will become a regular feature or not.

Cheers, Chris.

Re: Radio Australia digital test transmission

Posted: Sun May 19, 2013 11:54 am
by VK3YE

Re: Radio Australia digital test transmission

Posted: Sun May 19, 2013 1:29 pm
by VK3AZZ
Hi Guys,
Can you point those of us who are not so familiar with these digital modes pointers as to what software etc we can use to decode these test transmissions ?

Thanks
Mal
VK3AZZ

Re: Radio Australia digital test transmission

Posted: Sun May 19, 2013 3:00 pm
by ZL3RC
It looks like VK2TPM is using good old Fldigi which can decode both MFSK16 & MFSK32.
Its a Mac and PC compatible app so we can all do the decoding :D

This link will take you to the download site:
http://www.w1hkj.com/Fldigi.html

Enjoy

Roger ZL3THQ

Re: Radio Australia digital test transmission

Posted: Sun May 19, 2013 5:39 pm
by VK3AZZ
Thanks Roger

Cheers,
Mal
VK3AZZ

Re: Radio Australia digital test transmission

Posted: Sun May 19, 2013 6:13 pm
by VK4DU
That is most interesting.

Many thanks.

The Bureau of Met are doing the same kind of thing, but using DRM.

Looks like Nigel (from Radio Oz) chose a better mode...

:-)

73
Glenn

Re: Radio Australia digital test transmission

Posted: Sun May 19, 2013 6:41 pm
by VK2BLS
Good copy on 7.410 MFSK-16 & 32 modes.

Re: Radio Australia digital test transmission

Posted: Sun May 19, 2013 6:45 pm
by VK5EI
Test transmission at 08:30 UTC all received ok tonight, using DM780 for decoding sofware. I have sent an email to Nigel as requested. :)

cheers - VK5EI
Joe

Re: Radio Australia digital test transmission

Posted: Sun May 19, 2013 7:14 pm
by VK2CSW
Most interesting.

A first for me. Never successfully decoded any digital transmission before.

This could be strangely fascinating.

:)

Re: Radio Australia digital test transmission

Posted: Sun May 19, 2013 7:25 pm
by VK2PR
Thanks for the heads-up.

Successfully decoded the transmission and sent report to Nigel.

Screenshot attached.

Re: Radio Australia digital test transmission

Posted: Sun May 19, 2013 9:25 pm
by VK5IR
What mode do we set the radio to receive to receive these signals?

Re: Radio Australia digital test transmission

Posted: Sun May 19, 2013 9:33 pm
by VK2PR
The transmission is AM.

Re: Radio Australia digital test transmission

Posted: Sun May 19, 2013 10:45 pm
by VK5IR
Received the MFSK16 transmission fine here is Adelaide, didn't get much of the MFSK32 transmission very well though. I was using DM780.

Received on 9580 KHz.


Signal was 579. Emailed them a transcript of what I received and an audio recording of their signal as requested.

I wonder what their output power would have been?

Re: Radio Australia digital test transmission

Posted: Sun May 19, 2013 11:46 pm
by VK2PR
Pretty sure it's 100kW out of Shepparton.