Hi Guys,
Paddingtons old 2 meter repeater has now been upgraded to a Motorola MTR2000. The power has been cranked up from the old repeater and and it has much greater sensitivity compared to the old one. If people could hop on and test it out and give signal reports that would be great!
Cheers,
Matt
VK2LK
VK2ROT 2m upgrade
VK2ROT 2m upgrade
Matt, VK2LK
Re: VK2ROT 2m upgrade
S9 at Macquarie Fields on a J Pole. Excellent sounding base.
Cheers
Richard
VK2AAH
Cheers
Richard
VK2AAH
Re: VK2ROT 2m upgrade
S9 at Campbelltown CBD. Antenna at 10m AGL.
Can trigger on low power, no one answred the call at the time to give me a signal report, but I gather it works!
Good to see the MTR2000 in use.
Mal
Can trigger on low power, no one answred the call at the time to give me a signal report, but I gather it works!
Good to see the MTR2000 in use.
Mal
Re: VK2ROT 2m upgrade
Just had a QSO with VK2ZDM who was at Randwick.
My signal on low power was slightly noisy at worst so it seems the repeater is doing well. Perfect copy on high power.
A "well done" to the ROT team.
Mal
My signal on low power was slightly noisy at worst so it seems the repeater is doing well. Perfect copy on high power.
A "well done" to the ROT team.
Mal
Re: VK2ROT 2m upgrade
Can whack it with my hand held on low power inside the house from Erskineville - I could never do that before (had to switch the h/h to 5 watts in order to hit it), just tuned the FTM350/AR to the frequency. Will listen for a while.
Re: VK2ROT 2m upgrade
A dead spot on the North-West side of Darling St in Balmain/Birchgrove on a HT. Granted, it's a little behind the crest. Surprisingly though, can hit VK2ROT's 70cm repeater, just.
Weiyun VK2FABS