Hello,
Just to let you know there is a new 10m beacon now in operation at Merbein, about 7km west of Mildura (NW Victoria). The beacon is on 28.2630 CW operating under the callsign of VK3RRU. The beacon is currently running 20W into a vertical antenna. For more information on the beacon please look up VK3RRU on qrz.com.
Reception reports are welcome to vk3rru@gmail.com
Regards
Cameron
VK3ZDX
New 10m Beacon at Mildura
Re: New 10m Beacon at Mildura
Had a quick listen but nothing heard here yet, bit close. Possibly something coming back from the north, but hard to tell with all the pops and whistles on there currently.
As you have VK3RRU on QRZ, is it possible that you could also add the 2m beacon which is also listed under that callsign ? Im not sure if the 23cm beacon has that call also or not? Is there a 70cm one?
Good stuff.
As you have VK3RRU on QRZ, is it possible that you could also add the 2m beacon which is also listed under that callsign ? Im not sure if the 23cm beacon has that call also or not? Is there a 70cm one?
Good stuff.
Re: New 10m Beacon at Mildura
No worries Leigh,
That should not be a problem to do. I will get all the info and add it to there.
Cheers
Cam
That should not be a problem to do. I will get all the info and add it to there.
Cheers
Cam
Re: New 10m Beacon at Mildura
Yep it was pounding into Perth yesterday around 0200utc, 579, strongest VK 10 metres bcn i have ever heard
Outstanding signal, not bad for 20 watts it reported
Outstanding signal, not bad for 20 watts it reported
Re: New 10m Beacon at Mildura
I will monitor for this beacon tomorrow. It's interesting how the country's 10m beacons come and as quickly go again during the course of a day.
From here though, I will need to filter down the Rx frequency since VK2RSY is strong and close by (28.2615 MHz).
73 - Rob VK2GOM / GW0MOH
From here though, I will need to filter down the Rx frequency since VK2RSY is strong and close by (28.2615 MHz).
73 - Rob VK2GOM / GW0MOH
Re: New 10m Beacon at Mildura
I didn't hear anything, although the Perth beacon was banging in this morning just 700Hz away...
73 - Rob VK2GOM / GW0MOH
73 - Rob VK2GOM / GW0MOH
Re: New 10m Beacon at Mildura
Beacon has now been active for 3 or so days, with some good results given the poor conditions on 10m recently. Looking forward to seeing what happens when the propagation picks up over summer.
WB7BBI 28263.0 VK3RRU/B DM93BM<> 529 w/qsb 2257 02 Aug Australia
ZL1CDX-@ 28263.0 VK3RRU/B Strong Mildurra 0128 02 Aug Australia
WJ5O-@ 28263.0 VK3RRU/B new Australian Bcn 529>EM71 2325 01 Aug Australia
Cheers
Cam
WB7BBI 28263.0 VK3RRU/B DM93BM<> 529 w/qsb 2257 02 Aug Australia
ZL1CDX-@ 28263.0 VK3RRU/B Strong Mildurra 0128 02 Aug Australia
WJ5O-@ 28263.0 VK3RRU/B new Australian Bcn 529>EM71 2325 01 Aug Australia
Cheers
Cam
Re: New 10m Beacon at Mildura
Hello all,
The VK3RRU 10m beacon (28.2630 CW) is back on air and is being spotted again. It is transmitting 12W into a 1/2 vertical antenna. Reception reports are welcome to vk3rru@gmail.com
You can find out more at: http://www.qrz.com/db/vk3rru
Cheers,
Perrin VK3XPT
The VK3RRU 10m beacon (28.2630 CW) is back on air and is being spotted again. It is transmitting 12W into a 1/2 vertical antenna. Reception reports are welcome to vk3rru@gmail.com
You can find out more at: http://www.qrz.com/db/vk3rru
Cheers,
Perrin VK3XPT