Hi all,
This is now available...
https://www.analog.com/en/products/adf4 ... t-overview
regards
Tim
New from Analog the ADF4371 62Mhz - 32Ghz Synthesizer
New from Analog the ADF4371 62Mhz - 32Ghz Synthesizer
--
VK2XAX :: QF56if23 :: BMARC :: WIA :: AMSAT-VK
VK2XAX :: QF56if23 :: BMARC :: WIA :: AMSAT-VK
Re: New from Analog the ADF4371 62Mhz - 32Ghz Synthesizer
Its dam expensive though Tim.
Looks like somewhere around $390+NZ
Roger
Looks like somewhere around $390+NZ
Roger
Re: New from Analog the ADF4371 62Mhz - 32Ghz Synthesizer
LOL yes... but I've noticed that just about anything that goes above 10Ghz gets an exponential increase in $ !ZL3RC wrote:Its dam expensive though Tim.
Looks like somewhere around $390+NZ
Roger
Maybe we'll see a price drop over time like many other devices of that ilk.
--
VK2XAX :: QF56if23 :: BMARC :: WIA :: AMSAT-VK
VK2XAX :: QF56if23 :: BMARC :: WIA :: AMSAT-VK
Re: New from Analog the ADF4371 62Mhz - 32Ghz Synthesizer
Theres alot of new MW chips from the like of Skyworks, Analog, who bought Hittite. I used the MAX2870 35-6GHz in my HB sig generator. Works well. Theres now units to 14GHz. I will be looking at using one to 'stich up' a 10GHz transverter of some sort. Thinking of replacing the DRO in a 10G satellite down convertor unit that works over the Ham band. (If it still works )
390 NZ sounds a weee bit much ATM
390 NZ sounds a weee bit much ATM
Re: New from Analog the ADF4371 62Mhz - 32Ghz Synthesizer
Don't forget the output level is quite low so you need a wideband power amp as well, plus don't forget FR4 PCB will present significant challenges at that frequency. The BOM starts to look expensiveZL3RC wrote:Its dam expensive though Tim.
Looks like somewhere around $390+NZ
Roger
This chip may be appropriate for wideband testgear, but for the ham bands you are best to stay around the 10-12 GHz mark and multiply up from there using appropriate devices, or surplus triplers such as the venerable CMA38400. Most of the modern chipsets that will get you on 24GHz and 47GHz multiply up from 10 to 12GHz.
I have to admit there are lots of options on the market now with little difference in specs - Analog seems to be releasing a new one every few weeks. Maybe hold out until 5G starts to play in the 28GHz space to see what that creates.
73
Wayne ZL2BKC
Re: New from Analog the ADF4371 62Mhz - 32Ghz Synthesizer
All good points ! I dont know the CMA38400 - can you point me at some info ?ZL2BKC wrote: Don't forget the output level is quite low so you need a wideband power amp as well, plus don't forget FR4 PCB will present significant challenges at that frequency. The BOM starts to look expensive
This chip may be appropriate for wideband testgear, but for the ham bands you are best to stay around the 10-12 GHz mark and multiply up from there using appropriate devices, or surplus triplers such as the venerable CMA38400. Most of the modern chipsets that will get you on 24GHz and 47GHz multiply up from 10 to 12GHz.
I have to admit there are lots of options on the market now with little difference in specs - Analog seems to be releasing a new one every few weeks. Maybe hold out until 5G starts to play in the 28GHz space to see what that creates.
73
Wayne ZL2BKC
A quick search on Ebay turned up nothing but colourful phone cases and googling turned up some references in issue 207 of the French Microwave Mag Hyper but no hard data or where one might acquire such a device.
thanks
Tim
--
VK2XAX :: QF56if23 :: BMARC :: WIA :: AMSAT-VK
VK2XAX :: QF56if23 :: BMARC :: WIA :: AMSAT-VK
Re: New from Analog the ADF4371 62Mhz - 32Ghz Synthesizer
Apologies I got the model number slightly wrong. Search for CMA382400AUP which is the full model and there are a few on eBay for US$56 at the moment.VK2XAX wrote:
All good points ! I dont know the CMA38400 - can you point me at some info ?
A quick search on Ebay turned up nothing but colourful phone cases and googling turned up some references in issue 207 of the French Microwave Mag Hyper but no hard data or where one might acquire such a device.
thanks
Tim
They are very popular on 76GHz and 122GHz transverters since they produce a healthy 100mW+ on 38 to 41GHz which becomes the LO driving a harmonic mixer on these bands.
Add a ZLPLL 14G or similar and you are 80% of the way there!
DL2AM has some articles on his website about them (in German), but if you have DUBUS you get to read the english translated version.
73,
Wayne
Re: New from Analog the ADF4371 62Mhz - 32Ghz Synthesizer
ZL2BKC wrote:
Apologies I got the model number slightly wrong. Search for CMA382400AUP which is the full model and there are a few on eBay for US$56 at the moment.
They are very popular on 76GHz and 122GHz transverters since they produce a healthy 100mW+ on 38 to 41GHz which becomes the LO driving a harmonic mixer on these bands.
Add a ZLPLL 14G or similar and you are 80% of the way there!
DL2AM has some articles on his website about them (in German), but if you have DUBUS you get to read the english translated version.
73,
Wayne
thanks for that noted and bookmarked
cheers
Tim
--
VK2XAX :: QF56if23 :: BMARC :: WIA :: AMSAT-VK
VK2XAX :: QF56if23 :: BMARC :: WIA :: AMSAT-VK
Re: New from Analog the ADF4371 62Mhz - 32Ghz Synthesizer
If you buy one of these from 'total_parts' ebay seller then ignore his comment about it requiring 12v at 4A. That is guaranteed to kill it.ZL2BKC wrote:Apologies I got the model number slightly wrong. Search for CMA382400AUP which is the full model and there are a few on eBay for US$56 at the moment.
They need +6v, +8v and -5v supplies. Make the +6v & +8v adjustable (they can be tweaked to get the maximum output).
When used for a 76G or 122G transverter, the +6v supply will need to be reduced when in receive mode. When receiving, the diode mixer noise figure is better with less LO drive.
73
Iain Crawford - VK5ZD
Munno Para West, SA - PF95ih
Iain Crawford - VK5ZD
Munno Para West, SA - PF95ih