Hi All
A new GPS locked VHF Group VK6RPH Beacon built by VK6RK is now operating on 6M, 2M, 70cm and 23cm under test At Wireless Hill. It uses the ZL2BKC multi mode controller with a separate PA for each band and is currently connected to a modified CB Ringo vertical on 6M and a triband vertical for the other three bands.
Frequencies are: 50.066, 144.460, 432.460, 1296.460 MHz
It is planned to relocate the Beacon to a new permanent site on the Darling Scarpe as soon as this can be arranged.
VK6RPH Beacon
VK6RPH Beacon
Last edited by VK6ZFG on Tue Jan 15, 2019 9:43 am, edited 1 time in total.
73s
Igor
VK6ZFG
Igor
VK6ZFG
Re: VK6RPH Beacon
Thanks for the update Igor
6,2 & 70 all heard clearly at my QTH.
As well as CW ident seem to have what sounds like a JT65 ident.. but start timing is along way off to decode.
its good to have the beacons back.
Thanks
6,2 & 70 all heard clearly at my QTH.
As well as CW ident seem to have what sounds like a JT65 ident.. but start timing is along way off to decode.
its good to have the beacons back.
Thanks
- VK7HH
- Forum Diehard
- Posts: 474
- Joined: Thu Sep 08, 2005 11:18 pm
- Location: Southern Tasmania
- Contact:
Re: VK6RPH Beacon
Thanks for your efforts. Which direction will the antenna be pointing on this beacon?
We've been hoping for a few beacons further south down the coast to be reactivated or established... ideally with digital modes
We've been hoping for a few beacons further south down the coast to be reactivated or established... ideally with digital modes
Re: VK6RPH Beacon
Video of new perth bcn on test courtesy of VK6UU Will
temp location and still on test
https://www.youtube.com/watch?v=nQ73JU0 ... e=youtu.be
vk6six
e&oe
temp location and still on test
https://www.youtube.com/watch?v=nQ73JU0 ... e=youtu.be
vk6six
e&oe