FLdigi, Signalink USB and IC-756Pro3

[VK4WDM]

Is anybody out there using this combination? I can't get any transmitter output or the Signalink PTT to trigger using Fldigi on any mode.

Works fine with Digipan and other programs so it must be something in the Fldigi setting up that I have missed.

Any ideas?

73

Wayne VK4WDM

[VK4CLG]

Hi Wayne.
Only thing I can think of that you might have wrong is in the setup menu.
Click on Configure and go into the user interface. Under the Rig tab make sure you have a tick in the "PTT Tone on right audio channel" box. That is how mine is setup for the signal on my IC-756 PII.
The other option is to get a simple ci-v cable and configure the com port to do the PTT but putting the tick in the box in the PTT tone box should make it TX on the signal link.
I hope that works for you.

Cheers
Robert
VK4LHD

[VK4WDM]

Hi Robert

Thank you for the suggestion. The gear is over at the RAAF Museum station VK4KG and I will try it out when I go there on Thursday.

73

Wayne VK4WDM