G'day all,
I'm slowly getting the bits together for my next project based on the 70cm PA boards that were offered for sale at this years Gippstech - http://www.vklogger.com/forum/viewtopic ... 11&t=12507
To keep the output as clean as possible, I'll be running the output through a low pass filter network, and I've been eyeing off the LPF that Jim (W6PQL) offers on his website here (which has the added bonus of a directional coupler built in, which will come in handy:
http://www.w6pql.com/filter_+_coupler_+_detectors.htm
I've heard that Jim does good work, and offers the LPF as built/tested/tuned for $100US.
Does anyone have any experience with Jim's LPF, or can recommend any other LPF?
73
Jayson
VK1JA
432 MHz Low Pass Filters
Re: 432 MHz Low Pass Filters
Hello Jayson.
You won't be disappointed with Jim's equipment.
If you buy the kit the coils are already mounted on the board and adding the components is not a big job plus save a few dollars.
73
Joe
VK7JG
You won't be disappointed with Jim's equipment.
If you buy the kit the coils are already mounted on the board and adding the components is not a big job plus save a few dollars.
73
Joe
VK7JG
Re: 432 MHz Low Pass Filters
Jayson,
Jim's stuff is always great stuff - nothing more to say!
Cheers
Peter VK3QI
Jim's stuff is always great stuff - nothing more to say!
Cheers
Peter VK3QI
Re: 432 MHz Low Pass Filters
Thanks for the replies guys, I've ordered one from Jim.
Slowly getting all the bits together for the amp so I can add them to the projects list
Slowly getting all the bits together for the amp so I can add them to the projects list