I've just completed testing of an IC-9100 locked to 10MHz using a new version of the XRef known as the XRef-PLL.
As is probably obvious from the name, the new board uses a PLL to lock the IC-9100's own TCXO.
However, there's a bit more to it than that, so that the radio will revert to standard without 10 MHz connected.
The XRef-PLL will be available in several weeks, when we get the v1.0 PCBs. Price will be $80 plus postage.
The installation notes are here: http://www.vk3hz.net/XRef/XRef_Icom_IC-9100.pdf
The web page will be updated once the boards are actually available.
The XRef-PLL should work with a range of recent Icom radios. Please ask.
Regards,
Dave
VK3HZ
XRef - New Version for IC-9100
- VK3BQ
- Forum Diehard
- Posts: 617
- Joined: Wed Sep 02, 2009 9:13 pm
- Location: Mt Waverley, Vic.
- Contact:
Re: XRef - New Version for IC-9100
Very exciting thanks
- VK3HZ
- Forum Diehard
- Posts: 436
- Joined: Sat Apr 02, 2005 4:52 pm
- Location: Melbourne, Australia
- Contact:
Re: XRef - New Version for IC-9100
The XRef-PLL for the Icom IC-9100 is now available.
Details including pricing and the latest Installation Guide are on the web site at: http://www.vk3hz.net/XRef/XRef_Home.html
Regards,
Dave
VK3HZ
Details including pricing and the latest Installation Guide are on the web site at: http://www.vk3hz.net/XRef/XRef_Home.html
Regards,
Dave
VK3HZ