Sydney 70cm P25 repeaters
Re: 70cm P25 repeaters
Carlingford works very nicely, nearly as easy as getting into Paddo from 11th floor King St hotel room with no external view. I couldn't get into Razorback or any of the other digital repeaters.
With a 5W handheld, my signal into Carlingford was mostly unusable in FM but quite respectable (with a somewhat high BER) in P25.
With a 5W handheld, my signal into Carlingford was mostly unusable in FM but quite respectable (with a somewhat high BER) in P25.
Re: 70cm P25 repeaters
Razorback is very quiet.
I gave a couple of calls on it when I was in Camden on Wed.
I gave a couple of calls on it when I was in Camden on Wed.
Re: 70cm P25 repeaters
Yes its a bit depressing. I'm out at Camden a fair bit and I also put a call out when I'm there and hardly anyone comes back
I have also heard that VK2RAG (439.950) at Gosford is also P25 capable and was on air until it developed a fault recently so its been taken out of service.
Cheers,
Matt
I have also heard that VK2RAG (439.950) at Gosford is also P25 capable and was on air until it developed a fault recently so its been taken out of service.
Cheers,
Matt
Matt, VK2LK
Re: 70cm P25 repeaters
Moved repeater list to first post in thread.
Last edited by VK2LK on Mon Dec 31, 2012 9:15 am, edited 5 times in total.
Matt, VK2LK
Re: 70cm P25 repeaters
The wia repeater list has 8.425 as Heathcote P25...do you know anything about it, Matt?
Re: 70cm P25 repeaters
Yeah, its temporarily off air. The St George ARC website says that its due to maintenance.
Cheers,
Matt
Cheers,
Matt
Matt, VK2LK
Re: 70cm P25 repeaters
Hi all,
The GPT P25 repeater is now back on air.
VK2RCG - GPT - 438.2000MHz (Input 432.8000MHz) NAC 0x293
Cheers,
Matt
The GPT P25 repeater is now back on air.
VK2RCG - GPT - 438.2000MHz (Input 432.8000MHz) NAC 0x293
Cheers,
Matt
Matt, VK2LK
Re: 70cm P25 repeaters
Typical.....CBD machine comes on the day after I leave....
Matt, I reckon you seriously need to think about linking some of the P25 machines together.
They are awfully quiet.
73 and thanks for the chats
Glenn
Matt, I reckon you seriously need to think about linking some of the P25 machines together.
They are awfully quiet.
73 and thanks for the chats
Glenn
Re: 70cm P25 repeaters
Yep, agreed Glenn. Serious thoughts are underway, and the appropriate discussions being held as time permits!VK4DU wrote:Matt, I reckon you seriously need to think about linking some of the P25 machines together.
Cheers,
Matt
Matt, VK2LK
Re: 70cm P25 repeaters
Well done mate, it works great. Look forward to talking to you on there tomorrow for a bit of testing of its coverage.VK2LK wrote:Hi all,
The GPT P25 repeater is now back on air.
VK2RCG - GPT - 438.2000MHz (Input 432.8000MHz) NAC 0x293
73.
Re: 70cm P25 repeaters
Two of them in Sydney are already linked. Any suggestions on which of the others should also be linked?VK4DU wrote:Typical.....CBD machine comes on the day after I leave....
Matt, I reckon you seriously need to think about linking some of the P25 machines together.
They are awfully quiet.
73 and thanks for the chats
Glenn
Compton
VK2HRX
QF56ne, Ryde, Sydney
VK2HRX
QF56ne, Ryde, Sydney
Re: 70cm P25 repeaters
I would add Berowra (linked to Kurrajong anyway) and Terrey Hills 7ocm (Manly Club)
YVA
YVA
Re: 70cm P25 repeaters
Hi Guys, I have updated the list to include Chatswood now on air.
Matt, VK2LK
Re: Sydney 70cm P25 repeaters
Carlingford is currently off air due to a power supply failure.
Hopefully it will be back on air soon.
Hopefully it will be back on air soon.
Matt, VK2LK
Re: Sydney 70cm P25 repeaters
Nah, one of the newer ones IIRC. They're all pretty susceptible to failure, especially in dusty environments.
Matt, VK2LK
Re: Sydney 70cm P25 repeaters
Looks like the damage to Carlo is worse than initially thought - the PSU was replaced, however once the repeater came back online, it turns out the PA is dead too...
Stay tuned for further updates
Stay tuned for further updates
Matt, VK2LK