VK Logger Ham Radio Forum Archive

Using DTR or RTS on Linux with WSJT-X v1.3 r3777 downloaded today. In "rigclass.cpp" is the function: int Rig::setPTT(ptt_t ptt, vfo_t vfo) Which should do all this stuff. As I see it, it doesn't. There is nothing for DTR or RTS mode not using "hamlib" in "not WIN32". I...

Using DTR for TX keying Well, that doesn't work either. The port "/dev/ttyS0" is open, but nothing happens. Sending from another terminal: user$ date > /dev/ttyS0 turns DTR on as expected. Do then: user$ stty 0 < /dev/ttyS0 turns DTR off. So, there is still some coding to do. Alan VK2ZIW

WSJT-X v1.3, r3777 on Fedota 19 x86_64 Issue1: CAT control of my IC-910H can't reliably switch bands and set the frequency. Issue2: CAT control can read the dialed frequency but TX from "TUNE" doesn't work. Issue3: RX audio doesn't always work. Also, desktop Sound Settings crashes when you...

On Ubuntu 12.04 LTS x86_64, the latest WSJT-X won't compile, but packages are available of WSJTX v1.1 which has SoundCard samplerate issues. None of my cards do 12000 in this box, so use the ".asoundrc" fix. I chose Ubuntu 12.04 LTS for it's Long Time Support. WSJT-X v1.3 needs Qt5, so bac...

Thanks George M1GEO, Can I ask you to include the versions of all software in your discussion, eg. Ubuntu 10.04 LTS x86_64 and, "svn -r3829 co svn://svn.berlios.de/wsjt/branches/wsjtx". This makes WSJT-X v1.3, r3777 by K1JT so we know what versions you are using. Also, in your "Runnin...

Another note: VMware server aka ESXi 5 does not support streaming audio to USB sound cards, so,
my brilliant idea of using several virtual machines one for each of my 3 radios, will not work.
Somehow I need the audio streamed over TCP/IP.

Has anybody any thoughts?

Alan VK2ZIW

Well, on Fedora 19 x86_64, WSJT-X "Configuration" "Ausio In: and Audio Out: come from PulseAudio. So, by default (NOT MY CONFIG) ALL cards belong to PulseAudio. This is CRAP as PulseAudio is defective. PulseAudio does not route audio, it, I have found, sends to all This is WHY I allow...

Sorry John VK2FAK, your solution is not relevant for the version of software, WSJT-X Ver 1.3.

Alan VK2ZIW

To Dave VK3HZ Yes, it would be fun to balloon with a Pi onboard and running WSJT-X or WSPR etc.. I've found an "armhf" WSJT and WSJT-X Ver 1.1 on the net for the Pi. The SD card in my Pi has gone corrupt.A Kingston 8Gb SDC4/8GB 31311-001.A00LF so, can't test yet. The WSJT-X team, (WSJT-X ...

Please DON'T submit a solution until YOU have tested it. Yes, you.

Reason: WSJT-X Ver 1.3 uses PulseAudio sound devices. ".asoundrc" has no effect.


80 when 1/2 wave rectification is NOT GOOD ENOUGH.

Alan VK2ZIW

You are not alone: Linux WSJT and WSJT-X have sound card issues: WSJT requires 11025 b/s sample-rate. -- available only on a USB Behringer UCA202 developed by Burr-Brown from TI, a USB Audio CODEC example. WSJT-X requires 12000 b/s. -- available from an Ensoniq ENS1371 PCI card. So, which sound card...

Hi, Can we truncate the "point" of a horn and place a "flat" antenna there? So, I did it. http://www.unixservice.com.au/hamradio/antenna It's pointed east at the moon, from Emu Plains, Now, all I need is WSPR, WSJT, WSJT-X on Linux (Fedora 19 x86_64) working. We need a Linux audi...

With Icom and Yaesu both making rigs with 2m, 70cm and 23cm I saw these missing, way back. But, for now issues, we need a Linux audio programmer to get WSPR, WSJT, WSJT-X back on track supporting the most popular audio sample-rates 44100 and 48000, that ALL cards support. Internal processing can be ...

Hi Adrian, There are very few 'linux/android sound', to device driver, programmers out there. WSJT/WSJT-X blues =============== WSJT uses 11025 b/s as the sample-rate used for audio processing. 11025 = 44100 / 4 WSJT-X uses 12000 b/s 48000 / 4 for audio processing. The "standard" sample-ra...

Dave VK2JDS has the bigger dish, 5m and has problems with the, very poor elevation bearing. "bearing", ballony, just a bolt through holes. It's meant to be adjusted, then bolted tight, never to move again. My 2.5m, yours and Dave's are the same mount as your picture. You must, before going...

Hi all, Time I spoke out... WSJT and WSJT-X on Linux use non standard sound sampling rates, such as 12000 and 11025 b/s. (48000 / 4 and 44100 / 4) Very few sound cards have drivers with these rates. Not one USB sound card, I know of, offers these rates, so, how do I use a laptop? Yesterday, I downlo...

Yagi antennae, just DON'T work over the range 49.5 to 52.5 MHz. I've been modelling with 4nec2 and, over the range 49.5 to 50.5 MHz, one does well. SWR < 2:1 Extend the range to 49.5 to 52.5 MHz and the SWR at 52.2 would be 5:1 or more. To get the F/B (Front to Back) to be decent over this range, I...

I scanned it in years ago... 2009

Alan VK2ZIW

http://www.unixservice.com.au/hamradio/ ... index.html

Hi Gary, The unit I obtained had 5 in total "N" to the 'whatever it was' bulkhead connectors. HUBER+SUHNER branded. I've pulled everything out of the 'big black box' now. lots of 1-4GHz mixers type MCA1-42MH Many other 3 terminal RF amplifiers M3007N but, the "00" may be "99...

Make sure there's a drain hole in that waveguide U bend