$25.00

Out of stock

Category:

Description

Eltek Flatpack2 rectifier Controller PCB only (no parts, not assembled – PCB only) + MCU firmware + Nextion firmware.

Make your own Eltek controller!

Professionally fabricated double sided, through hole plating, silkscreen and blue solder mask.

99 x 49 x 1.6mm

Schematic and BOM are found on the project page:  http://vk4ghz.com/eltek-flatpack2-48v-2000-controller/

Arduino .hex file and Nextion .tft file will be emailed to you upon purchase of the PCB.

 

Requires:  SMD soldering skills, ability to program an Arduino using ArduinoSketchUploader, ability to program a Nextion HMI via card slot.

 

Additional information

Weight 26 g
Dimensions 9.9 × 4.9 × 1.6 cm