Took delivery of a Headplay HD FPV headset, and not along after, took it apart. As you do! To help with splitting the two halves,
If you’re wearing a FPV headset, goggles, or perhaps have a ground station being powered off a lipo battery you’ll want a low volts warning, but
Displaying RSSI on the micro MinimOSD can be achieved without adding the extra wire between it and the FrSky D4R II receiver’s signal pin 2 (used
Here we take a look inside the FR632 5.8 GHz diversity 32 Channel Auto Scan LCD A/V Receiver obtained from the Hobby King AU Warehouse for
The Naze32 Flight Controller has a “lost model beeper” output, which looks like this on the schematic diagram: We can see the beeper output is
Park Rangers in Africa are using a DJI Phantom to herd pesky elephants away from farmers crops. Originally aired on ABC-TV News 24 on Wednesday 20-5-2015.
It appears to be a common problem – the Xiaomi Yi action camera’s lens has been incorrectly preset in the factory. I’m guessing the Chinese assembly
To increase 5.8 GHz FPV range and minimise receiver dropouts, a broadband microwave LNA (Low Noise Amplifier) is assembled and tested. Whilst you could use a
Micro MinimOSD is a tiny On-Screen Display board that works with the Naze32 flight controller and came from Buzz Hobbies in Perth. First thing to
Following on from the prototype FPV microphone preamplifier assembled on Veroboard, a double-sided PCB was designed in DipTrace and the gerber files were sent to iTead
In this video we take a look at performing a return loss sweep on a ‘Heliaxial24’ 2.4 GHz 6½ turn helix antenna from Circular Wireless.
The Xiaomi Yi is my first camera that has 2.4 GHz connectivity built in. Having a number of R/C multirotors all using 2.4 GHz control, I
If you ordered a Xiaomi Yi action camera in early April, chances are it’s loaded with firmware v0.7.10. With the Xiaomi Yi arriving (April 24 2015)
Considering the FPV screen has a single 3.5mm A/V input connector, running a pair of common A/V RCA cables for video and audio between the VRX